// the above is not my code
K is for Kinds of Wood Boring Beetle (Woodworm)

K is for Kinds of Wood Boring Beetle (Woodworm)

In this instalment of A-Z of Atlantis Damp Proofing & Timber Specialists, K is for Kinds of Wood Boring Beetle (Woodworm).

How can you tell your Common Furniture Beetle from your Death Watch Beetle? Your Powderpost from your Long Horn? In our next blog, K is for…… Kinds of Wood Boring Beetle we help you identify one little nasty from another.  Fortunately, if you do think you have an issue with a wood boring beetle, we are the experts and can help you eradicate them from your home.

Signs of wood boring beetles:

To assess if you’ve got a live infestation or not, you need to look out for the following tell tale signs:

– New flight holes created by insects eating their way out
– New holes in any under-carpet paper floor backing
– Small wood dust build up outside bore holes – this is actually woodworm droppings, known as frass
– Presence of damp in the room or in the timber itself (woodworm thrive in damp conditions)

Which wood boring beetle is in my home?

Once you’ve identified that some of the tale tell signs are present in your property, its important to identify which species it is. ‘Woodworm’ is a general trend that refers to the larvae of wood boring beetles, that feed on wood and create a network of tunnels in structural and decorative timber. But attacks vary, depending on the type of timber and their life span in the larval stage. The larval https://www.atlantisdamp.co.uk/wp-admin/stage can range from 10 months to 11 years.

Common Furniture Beetle:

Appearance: 

The adult beetle is approx 3mm long and chocolate brown coloured. It is able to fly. Up to 80 eggs are laid and the life cycle averages 3 years. A relatively small insect, it is still capable of causing structural damage to your property.

Preferred timber: 

The sapwood of both hard and softwood.

Type of damage:

Responsible for about 75% of all woodworm damage to UK property, attacking both soft and hard woods. Bores extensively creating rounded tunnels, usually going with the grain of the wood – and will fly to find new wood sources.

Telltale signs:

 The droppings or frass of the Common Furniture Beetle are sandy, oblong pellets. The insect emerges from 2 mm diameter boreholes.

Death Watch Beetle:

The most damaging wood borer in old buildings, attacking hardwood and often found in timbers also suffering from fungal decay. Larger than the Common Furniture Beetle at 6 to 8mm long and greyish brown in colour. Its life cycle averages 5 to 6 years. The adult emerges from 4mm diameter round holes and is now known to be capable of flight. Eggs are laid in small clusters.

Wood Boring Weevil:

Established in post war Britain but already widespread and associated with wet rot decay. The adult is 3-5mm long, blackish brown and identifiable by its long ‘snout’. Normally associated with damp timber and appears to have two overlapping life cycles in the year. Flight holes are small 1mm diameter and ragged.

House Longhorn Beetle:

This large insect is found mainly in the southern Home Counties. It attacks only softwood but because of its size and ability to bore extensively through sapwood and into heartwood, the damage caused is rapid and severe. It is greyish brown to black, has a life cycle of 5-11 years and can reach 25mm long. Flight holes are oval up to 9mm by 6mm. Up to 200 eggs are laid.

Bark Boring Beetle:

Appearance:

 There are many types of bark-borers, but the most common have either dark-brown or light-brown colouring. They can cause major damage to the surface level of timber if left to do their worst.

Preferred timber: 

The Bark Borer exclusively targets softwoods with bark, and they fly locally to discover other timber sources.

Type of damage:

 Although the rounded tunnels this beetle creates are kept near the surface of the timber, this insect can still cause significant amounts of damage to all types of softwoods.

Tell-tale signs: 

Flight holes are around 2 mm in width, and its frass is rounded in shape and either light or dark coloured depending on the wood source.

Now you know a bit more about self diagnosis if you see holes in your timbers at home and remember to contact us for friendly, professional, expert advise to see how we can help you.

L is for Listed buildings

L is for Listed Buildings and the use of Electro Osmosis.

In this instalment of A-Z of Atlantis Damp Proofing & Timber Specialists, L is for Listed Buildings and the use of Electro Osmosis.

Today we went to survey a beautiful sandstone cottage in Tarporley, Cheshire and noticed a very old Electro Osmosis damp proof system in place. It got us to thinking. When would we recommend an Electro-osmosis system to be installed? (more…)

M is for Mortgage Reports (Pre-purchase Damp & Timber Surveys)

M is for Mortgage Report (Damp & Timber Pre-Purchase Survey).

In this episode of The A-Z of Damp from Atlantis Damp & Timber Proofing Specialists, we see how M is for Mortgage Report (Damp & Timber Pre-Purchase Survey).

Ask yourself:

Has dampness been noted on your mortgage lenders Home Buyers Report?
Is it rising dampness due to a failed damp-proof course? Is the answer chemical damp-proofing? Or is it a bridged damp-proof course? Penetrating damp? Condensation?

You may not know the answers to these questions. At Atlantis Damp Proofing & Timber Specialists , we are committed to getting you the answer so you go into any purchase with your eyes wide open. (more…)

N is for Nitrates and Rising Damp

N is for Nitrates and Rising Damp

In this installment of A-Z of Atlantis Damp Proofing & Timber Specialists, N is for Nitrates and Rising Damp.

In the vast majority of cases we use our experience and moisture profiling techniques to determine whether the dampness in your home is, in fact, rising damp. It could be from another source entirely. It could be a leak, condensation or penetrating damp. However, if you so wish we can confirm our findings. We do this through what is known as destructive testing. With destructive testing, we can see if there are chlorides and nitrates in the wall sample. Nitrates and Rising Damp are inextricably linked.

(more…)

O is for Owners Can Help

The A-Z of Damp & Timber from Atlantis Damp Proofing Specialists… O is for Owners can Help Themselves

In this episode of The A-Z of Damp from Atlantis Damp & Timber Proofing Specialists, O is for Owners can Help Themselves.

With the long weekend ahead of us, we know it should be the perfect opportunity to bring out the patio furniture and stock up on charcoal for the BBQ – but, it’s also the perfect time to give your property the “quick once over” to tackle any issues that may have come apparent during the winter months. Let’s take a look at some of the main problems you should look out for. (more…)

P is for …. Property Care Association (PCA)

P is for …. Property Care Association (PCA)

P is for PCA

In this episode of the A-Z of Atlantis Damp Proofing & Timber Proofing Specialists, P is for…… Property Care Association (PCA).

As members of the Property Care Association (PCA), we assure you that we are fully qualified to investigate, survey and resolve property defects.

What is the Property Care Association (PCA)?

The Property Care Association (PCA) is the trade association representing specialists who can be trusted to resolve problems affecting buildings. Formerly part of the BWPDA, the PCA is now the premier trade body for the structural waterproofing, wood preservation, damp proofing, flood remediation and structural maintenance industries in the UK. They are an organisation you can trust. As members, we can be trusted to provide peace of mind through a correct diagnosis. You can rest assured that work will be completed by skilled and experienced operatives.

The PCA regularly audit registered companies such as ourselves. This ensure that we measure up to the highest standards professionalism. You can rely on our diagnosis and remedial treatments. All aspects of our business are scrutinised during the audit process. Customer Service and Health and Safety considerations are also at the forefront of these audits that we have. By using a PCA accredited firm like us, you are assured that you are instructing a Company who has worked hard and significantly personally invested to achieve their qualifications. You know that we are committed to developing and sustaining our excellence.

Why use a PCA Member?

As well as these rigorous checks and tests, members of the PCA also enjoy this means we have Trust Mark accreditation. We are validated through this government backed scheme which declares that all tradespeople working in your home are trustworthy. In addition, we can provide access to insurance backed guarantees through Guaranteed Protection Insurance known as GPI. This means that the work we carry out for you would continued to be guaranteed in the unlikely event that we cease to trade.

You can trust us to investigate and resolve your property defects involving: Damp, condensation, timber decay, insect attack, & dampness and water penetration in basements.

We also gained our personal qualifications through the PCA. This ensured that our practical experience was well informed by industry leading techniques, methodologies and best practice.

And remember, the PCA website is also a great resource for you, the home-owner. The information there will be based on facts and best practice approach. Through them, we have access to the top experts in the industry. If you want to know more about the areas of damp, decay or waterproofing The Property Care Association is a great place to visit for real solid facts relating to our specialist areas.

What next?

By using us, you can feel reassurance that you are not dealing with cowboys. We are an established, local company that are qualified experts in a field. Contact us now to see how we can help you.